CCrystal Time Base: A crystal reference is employed for those applications requiring independence from the line frequency. A trimming function is included for greater accuracy (2-3 seconds/week).
ClearClear Anodized Front Panel
DRemote Control: This option consists of a connector wired to switches on a control plate via a six-foot cable. Extra cable available.
J220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
LTLight Tower: Composed of a foot, base unit, three LEDs - Green, Yellow/Amber & Red - and a cap for for timing and controlling individuals who are engaged in Public Speaking. It is powered by an included 24V Power Supply. Must also order Option X.
NReverse Count at Zero: Changes count direction from Down to Up at Zero.
P19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" black anodized Aluminum and chassis is 5" - 10" deep.
P2Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel. Must be ordered in place of option 'P' if specifying option 'D'.
QConsole Mount: The unit is housed in an enclosure 8" deep, front panel is 3.5" x 9", 1/8" clear anodized aluminum. 'Q' can only be ordered if option 'D' is included.
TTenths of Seconds: Tenths of Seconds LED Display added.
UL"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
XThree Relay Outputs: Three Relay Outputs (two are programmable, 3rd @ "00:00") (Option 'Z' is included).
YRelay Closure at Zero: Reed Relay for Control Applications (10W max load; 500ma switching current).
ZStop with reed relay closure at Zero (10W max load; 500ma switching current).