CCrystal Time Base: A crystal reference is employed for those applications requiring independence from the line frequency. A trimming function is included for greater accuracy (2-3 seconds/week).
ClearClear Anodized Front Panel
DRemote Control: This option consists of a connector wired to switches on a control plate via a six-foot cable. Extra cable available.
ESEESE Time Code Output: An ESE Time Code output is provided allowing the unit to drive ESE Time Code Slaves.
J220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
NReverse Count at Zero: Changes count direction from Down to Up at Zero.
P19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" black anodized Aluminum and chassis is 5" - 10" deep.
P2Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel.
QConsole Mount: The unit is housed in an enclosure 8" deep, front panel is 3.5" x 9", 1/8" clear anodized aluminum.
RRemote Input: Rear-mounted connector for Remote Control.
SParallel BCD Slave: Parallel BCD Slave for use with old style BCD Outputs.
TTenths of Seconds: Tenths of Seconds LED Display added.
UL"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
YRelay Closure at Zero: Reed Relay for Control Applications (10W max load; 500ma switching current).
ZStop with reed relay closure at Zero (10W max load; 500ma switching current).