810FRuggedized enclosure to meet MIL-STD-810F standards.
ACAC Adapter: An AC Adapter with mating connector is provided. Intended for bench testing.
AntGPS Antenna: High Performance GPS Antenna for harsh RF Environments.
BParallel BCD Output: CMOS compatible, 5-volt logic in parallel four-line format is accessible through a rear-mounted D-sub connector.
Display.4" LED Display: Six digit 0.4" red LED display for Airborne units.
FFuse: A panel mounted fuse is supplied. An internally mounted fuse is standard.
HQ-Out"Have Quick" Time Code Output: A "Have Quick" Output is provided. This Option meets the ICD-GPS-060 standard.
JamIRIG-B Jam Sync Input
MotoMotorola Output: This Output is from the GPS receiver. It contains latitude, longitude and altitude information as well as time code information.
NMEA1The NMEA GPZDA (Time & Date) output is provided. The NMEA GPZDA output replaces the standard RS-232C Format A output.
OROrange Powder Coat Enclosure
SMPTE/EBUSMPTE or EBU Time Code outputs: SMPTE or EBU Time Code outputs may be specified (not available with IRIG).
TTLIRIG-B TTL Output: via panel mounted BNC connector