AntGPS Antenna: High Performance GPS Antenna for harsh RF Environments.
ClearClear Anodized Front Panel
DCDC Operation: Requires the unit to be powered from a DC source exclusively, typically +12 to +35 VDC.
EX10External Time Base: Available when a user prefers to reference the clock of an existing source of 10 MHz.
FREQFrequency Outputs: Provides two BNC connector outputs that can be individually programmed for any of the following frequencies: 8 KHz, 1.544 MHz, 2.048 MHz, 10 MHz, 19.44 MHz, 20 MHz, 25 MHz, 125 MHz, 155.52 MHz, 156.25 MHz.
HRRelay Closure: Option "HR" provides a user programmable relay contact closure. The standard contact closure occurs on the Hour and Half Hour. If contact closures at other times are desired, the user can program up to four relay closures using the PC Software, which can be downloaded from the ESE web site. The reed relay is rated at 10 watts maximum resistive load (500 mA switching current) and is intended for control applications only. The relay contacts are accessible on the DB-9 connector.
MGMulti-GNSS: Provides a Multi-GNSS Receiver capable of tracking multiple Global Navigation Satellite Systems.
OCXOOCXO: Provides an Oven Controlled Crystal Oscillator.
RbRubidium Oscillator: Provides a high-performance Rubidium Oscillator.
UL"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply (90-264 VAC).