6-DigitSix-Digit Display: A 6-Digit (Hr, Min & Sec) Front Panel Mounted Display. Option 'P' is required.
9-DigitNine-Digit Display: A 9-Digit (Days, Hr, Min & Sec) Front Panel Mounted Display (.55" LED) is provided. Option 'P' is required.
AntGPS Antenna: High Performance GPS Antenna for harsh RF Environments.
BParallel BCD Output: CMOS compatible, 5-volt logic in parallel four-line format. Specify the ES-169B.
BBUBattery Back-Up: An internal Gel-Cell battery is provided capable of maintaining the unit's microprocessor for up to a 4-hour power outage.
DCDC Operation: Requires the unit to be powered from a DC source exclusively, typically +12 to +35 VDC.
EBUEBU Time Code: The unit is configured to output EBU Time Code instead of SMPTE (standard, or at no charge on many units).
HRRelay Contact Closure: A contact closure occurs at the top of each Hour. Hour and 1/2 Hour closure may be ordered on some products. Relay contacts are rated at 10-Watts maximum load, 500mA maximum switching current.
IRIG-BIRIG-B Output: IRIG-B Time Code Output. IRIG-E cannot be specified when this option is ordered.
IRIG-EIRIG-E Output: IRIG-E Time Code Output. IRIG-B cannot be specified when this option is ordered.
J220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard. EBU and/or PAL may also be specified, if needed.
KProvides a 10 MHz output and a 1 KHz output. Option 'P' is required if option 'K' is specified.
P19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" black anodized Aluminum and chassis is 5" - 10" deep.
P2Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel.
SMPTE/EBUSMPTE or EBU Time Code outputs: SMPTE or EBU Time Code outputs may be specified (not available with IRIG).